VFD Booster Systems Service in NYC

Are you looking for Variable Frequency Drives (VFD) service in NYC? NY Pump & Motor has been providing Variable Frequency Drives (VFD) service in NYC since 1941 with prompt service and great customer care.

A building has more value when it more conducive for living. When you install pumps in commercial buildings like apartment complexes, hotels, corporate buildings, etc., you most times need booster systems to help maintain and increase the pressure of motor in your HVAC equipment and pumps.

VFD is an abbreviation for Variable Frequency Drives. It is usually installed in motors to control and regulate the speed of the engine while running. Every building demands a certain level of power for the mechanical systems to run effectively. This is also known as the load of the system. The VFD helps to regulate the speed of the system with the load without using more energy than required.

Advantages of VFD Booster systems

If you are thinking of installing a new pump system or upgrading your present system, then you should know the benefits you would enjoy. These benefits may be short-lived if the installation is not done correctly. This is why NY pumps make it a duty to deliver the best. Here are some benefits of having a VFD Booster Systems Service.

Energy saving

Most people strive to make sure that their housing system is comfortable, cost-effective, yet environmentally friendly, and it isn't very easy to achieve it all. However, VFD, in some ways, helps to meet these standards.

VFD creates a variation in motor speed, which in turn saves energy. With VFDs embedded, for every 25% reduction in motor speed, there is a 60% reduction in power used. This factor creates a ripple effect on other aspects of the motor system.

Reduced demand charges

When using a VFD system, the amount of energy required is lower even during the peak period, which in turn lowers your demand charge. This means that there will be a significant reduction in your electricity bill.

Durability of equipment

Using VFD helps the system to last longer because the wear and tear of the motor are drastically reduced. When using VFD, the engine has a soft start, which helps to gradually build up energy as opposed to ramping up all at once.

Reduced repair costs

With a system that lasts longer, you are assured of spending less money on the repair. All you need is constant and effective maintenance. The reduction in wear and tear of the motors and the control of speed helps to prevent frequent repairs and replacements.

Diagnostic advantage:

This system allows you to connect to other facility management systems and gather information about them. This means that you collect data more comprehensively about other facility management systems in the building.

At NY Pump, we specialize in handling everything that has to do with your pump systems. Recently, pump systems created are embedded with in-built VFD. However, for old systems, we help with the installation of VFD Booster Systems Service using a retrofit. Our team comprises of professionals who will help you find the perfect match for your drive and motor. Contact us today to support and fix your pump motor needs.

Pump Repair Service in NY

Pump Repair Are you looking for Pump Repair in NYC? NY Pump & Motor Repair has been providing Pump Repair in NYC area since 1941. We pride ourselves with prompt & professional Pump Repair service with many years of experience and great customer care.

Pumps are an essential part of housing, and like every machine, from time to time, it requires repairs. However, different pumps require different techniques for repairs because they fundamentally have different parts.

Types of pumps

There are different categories of pumps, and all will require maintenance and repairs. Here are a few of them:

Water booster pump

A booster pump is used to intensify the pressure of fluid movement in a system. For water to move around buildings, especially really tall ones, booster pumps are needed to aid the water pressure. If you have ever been in a house where the water suddenly stops running, there is a very high possibility that the water booster pump is faulty and needs repairs; time to call for the cavalry!

Fire Pump

In modern housing, Fire pumps are non-negotiable. It serves as a part of a fire sprinkler system that is connected to a water source. Most times, it is activated when the system detects a possible fire outbreak.

When the fire sprinkler system in a building is exposed to heat that is above the design temperature, the system pressure drops which in turn activates the fire pump which opens and releases water to stop the source of the heat

Fire pumps are usually installed in high rise buildings, apartment complexes, etc. Due to its complexity, repairs are best handled by experts like NY pumps and motors to get excellent results.

Sump pump

Not all buildings have sump pumps. However, it is installed in the basement of a house to prevent water from accumulating. A sump pump is essential because it helps to solve flooding problems. Its primary role is to take the water away from the house to a place where it can cause no damage e.g., storm drains or dry wells.

Installing sump pumps is a method of basement waterproofing, mainly when water flows in through the perimeter drains or the foundation is below the water table level. It requires regular maintenance because it has a propensity to get clogged easily. A sloppy maintenance strategy will lead to constant repairs

Sewage pumps

In simple terms, a sewage pump is a mechanism for transferring sewage solid or liquids from one spot to another. Usually, the pump is installed at the lowest point of the sewage basin; this is why it is submerged. Being a centrifugal pump, the design allows both solid and liquid to pass through it without clogging the pump.

Although there are different kinds of sewage pump, it is best always to install the automatic one to avoid sewage overflow. There are other types of sewage pumps like Effluent, Solid handling, and Grinder pumps. No matter the class, the main aim is to eliminate sewage build-up in a building.

Almost every building has all the types of pumps listed above, and this is why at NY Pump and motor, we specialize in taking care of all your pump repair needs. We have well trained and experienced technicians who can help identify, analyze, and solve any pump problems you may be facing. We make sure service delivery is excellent and prompt. Contact us today for your pump Service needs.

For more information about Pump Repair in NYC call NY Pump & Motor at: (718) 768-8700

NY Pump & Motor - your trusted Pump Repair in NYC

Get a FREE Pump Repair estimate in NYC

Sump Pump Repair in NYC

Are you looking for Sump Pump service in NYC? NY Pump & Motor has been providing Sump Pump service in NYC since 1941 with prompt service and great customer care.

No one wants to wake up to the terrible sight of the ankle-deep flooded basement; this is why you need to make sure that your sump pump is working correctly. If you have a faulty sump pump, you are not only at risk of having a flooded basement, but you are also at risk of losing valuables and spending money on damages.

New York Pump and Motor Technicians are available 24/7 to help you prevent and solve any Sump Pump problems by performing routine checks, emergency repairs, and replacement services. Using our services, we make sure that your sump pump is in good working condition.

What is a sump pump?

A sump pump is a pump used in the basement to keep it from flooding when the snow melts or the rain starts. The float of the sump pump rises as the water in the sump pit increases, which then triggers the pump to begin pulling water from the pit. The water pulled out is emptied into a storm drain, well or nearby area.

A sump pump is used in any building, even commercial ones. Apartment buildings, hotels, and commercial buildings usually have elevator pumps to keep water from flooding the elevator shafts. Though these pumps are used for industrial purposes, they operate the same way as conventional sump pumps.

Types of sump pumps

Sump pumps are mainly of two types:

Pedestal Sump Pumps: This type is placed above the sump put which give easy access for periodic servicing and testing

Submersible Sump Pumps: This type usually sits on the sump pits or well.

Signs you need sump pump repair services

1. When your pump is running without water in the sump pit: When this occurs, it shows that there is a problem with the float or the pump was not installed correctly.

2. When the pump or switch is clogged: Without proper checks and maintenance, debris can block the sump pit. Other causes may include a jammed float switch or dirty mechanical parts.

3. When the sump pump is making unusual noises: Rattling, grinding, or gurgling sounds are an indicator of a problem with the motor. Sometimes the problem may also be the valves or discharge pipe.

4. When the sump pump is running continuously

5. When the sump pump is not working at all: Most times, the root cause of this problem is an electrical fault.

6. Aging Pump: A clear indicator of this would be a musty or moldy smell coming from the sump pump

Our sump pump repair services

Fixing the circuit breaker and other electrical faults

Cleaning the screen and Impeller

Fixing of replacing the check valves

Repairing or replacing the float

Cleaning the sump pit.

Our team of well-trained professionals thrives on making sure you are satisfied; this is why we make sure to fix any problems promptly before it causes any more damages. At New York Pump and Motor, we also offer regular service and maintenance to prevent any sudden repairs and to prevent casualties. Contact us today and trust our team to handle all your sump pump problems.

For more information about Sump Pump service in NYC
call NY Pump & Motor at: (718) 768-8700

NY Pump & Motor repair - your trusted source for Sump Pump service in NYC

Pump Repair in NYC

Are you looking for Pump Repair in NYC? NY Pump & Motor Repair has been providing Pump Repair in NYC area since 1941. We pride ourselves with prompt & professional Pump Repair service with many years of experience and great customer care.

When it comes to water supply in your residential or commercial property, a pump is one of the most important components. A pump is a machine that moves a liquid from one location to another, usually against the force of gravity. A pump takes in mechanical power and produces fluid power. Pumps are machines that are inseparable from our day-to-day life. They find application in our homes, offices, factories and so many other locations. Without pumps, for instance, irrigation is impossible. Pumps like any other machine, can get damaged or have problems which would require repair.

One of the most obvious signals that you need to repair your pump is when the pressure of the liquid being released reduces. For instance, If you use a water pump in your home and you notice that the pressure of the water throughout your home reduces significantly, then there is a high chance that your pump needs repair.

Another sign that your pump needs repair, perhaps even urgently, is the appearance of dirty water from the taps or faucets. Your water should never look dirty, as it can be detrimental to your health to make use of it. For pumps that are used in other applications apart from the home, care should be taken to routinely examine the quality and type of liquid delivered. In doing this it can easily be discovered if there's an issue with the pump or piping system.

If you notice that there's a lot of air bubbles or “spitting” coming from your taps, it could be an indicator that your pump is in need of urgent repair. This is because of the way the pumping system is designed to operate, it should be held tight and full of only the pumped liquid. Finally, a higher-than-normal electric bill could be an indicator that your pump is malfunctioning. What happens is that your pump might be overworking to maintain the liquid’s pressure.

If you notice any of these things happening, then you should get your pump checked out. it is absolutely important that your pump undergoes maintenance from qualified personnel. In fact, it is necessary to have a regular maintenance schedule for your pump. This type of preventive maintenance, when performed routinely will save cost and extend the life of your pump. This will ensure that you enjoy optimum utility from your pump.

If you reside in NYC and need your pump inspected and repaired, NY Pump and Motor Repair provide pump repair services. Their services are prompt and professional, handled by certified pump repair professionals. Their services ensure that you experience minimum downtime as well as a properly functioning pump by the time they are done with the repair. What's more, they also provide 24/7 pump service as well as an emergency pump service. This means that no matter what time of the day or week that your pump breaks down, you are guaranteed a prompt and professional response that ensures that your pump is back to optimum operating efficiency in no time.

For more information about Pump Repair in NYC call NY Pump & Motor at: (718) 768-8700

NY Pump & Motor - your trusted Pump Repair in NYC

Chiller Pump Repair in NYC

Are you looking for Chiller Pump service in NYC? NY Pump & Motor has been providing Chiller Pump service in NYC since 1941 with prompt service and great customer care.

If you are in a building and the heat is becoming unbearable, there is the possibility that the chiller pump system is faulty. This is because the chilled water pump takes water from the air handling and fan coil units to the chiller, the chiller then cools the water and supplies it back to the air handling and fan coil unit. Once the chiller pump gets damaged remotely, the process is disrupted, which leads to heating of the equipment or the building.

At New York Pump and repair, we make sure that your chiller pump is working at full par with every part in excellent condition. We make sure that there is sufficient flow and pressure so that the system can handle a high cooling load. We take into consideration the fluid information, pipe information, Valve, and Fitting information to determine the quantity and quality of material to use in installation or repairs.

What is a Chiller pump system?

A chiller pump is used to circulate chilled liquids through process equipment; it is a part of the overall chilled water system. The chiller pump works through the simple process of cooling the system and then moving the heat away from the equipment and product. When the cooled liquid absorbs heat from the machine, making the liquid warm, the warmed liquid is moved back to the chiller and cooled again. Sometimes, a tank is used to store the fluid while a second pump is used to move the chilling liquid from the reservoir.

Types of chiller pumps systems include

Centrifugal Pumps

Reciprocating Pumps

Rotary Pumps

The most commonly used of these three is the Centrifugal pumps, and they are divided into in-line Pumps and end-suction pumps.

Uses of a chiller

1. Cooling Product and Machinery

2. Injection Molding

3. Tool and die-cutting

4. Storing food and beverage

5. Serve as semi-conductors etc.

6. Our repair services include:

7. Sealing leaks and repairing damaged parts

8. Removing impeller and bearings and replacing parts

9. Pump Demo

10. Laser alignment

11. Installing the new kit seal

12. Oil Analysis

13. Flow check

Using our team, we can promise you well-trained technicians with the latest tool to provide trustworthy and competent service. Our services not only cover repairs, but we also offer installation and maintenance services. We use state-of-the-art technology and cutting-edge machinery to meet your exact needs. Having an effective cooling system is critical to the overall productivity and finances of any organization.

For more information about Chiller Pump service in NYC
call NY Pump & Motor at: (718) 768-8700

NY Pump & Motor repair - your trusted source for Chiller Pump service in NYC

Fire Pump Repair in NYC

Are you looking for Fire Pump service in NYC? NY Pump & Motor has been providing Fire Pump service in NYC since 1941 with prompt service and great customer care.

Fire Incidents happen at any time, and the best you can do is be prepared for it. But sometimes even the instrument used for putting out the fire may be faulty and need repair or replacement. At the New York pump and motors, our priority is to make sure that your pump functions efficiently when the need arises.

In our line of work, ensuring the safety of the community is essential, and this why we have an experienced and well-trained team to help with installing, maintaining, and repairing any fire pump.

Why do you need fire pump repair services?

If a fire broke out and you arrived at the scene but were unable to quickly put out the flame because the sprinkler system was not functioning correctly, you will need expert fire pump repair services. Through the diagnoses, we will know the root cause of the problem and how to solve it.

Every building must have a dependable fire protection system in place. Commercial facilities like an apartment complex, office buildings, warehouses, etc. must prioritize protecting the property and its occupant. If the fire pump system is faulty, valuable assets and worse, human life can be lost. This is why you need a fire pump repair service to make sure that your fire protection system is working correctly.

Types of Fire Pumps

The most common types of fire pumps are:

 Horizontal Split case.

 Vertical Turbine Pump.

There are other types of fire pumps, but these are the most commonly installed ones.

Our Fire Pump Repair services

For repairs, some of the services include

1. Alignment of Laser shaft

2. Reassembling of Machine

3. Analysis, repairs, rebuild, and replacement of motors

4. Precision balancing and Impeller inspection repair

5. Fabrication of fire pump parts

6. Jockey pump repairs

7. Replacing pressure relief valves

8. On-site Troubleshooting of control panel

9. Repairing of the pressure regulator

10. Meticulous cleaning of fire pump components or parts and bead blasting

11. Special Coatings (where necessary)

12. Disassembly of Fire pump, inspection, non-destructive testing, and certification.

Although the need for repair may arise from time to time, some of such can be avoided by subscribing for fire pump preventative maintenance services. You may see it as cutting cost by not subscribing but it, in the long run, it saves you more money than having to repair damaged parts suddenly. At New York Pump and Motors, we take pleasure in making sure that every pump is specially treated and excellently fixed because we understand the importance of a fire pump in a building. Our technicians have adept knowledge of every part of the fire pump and the different models that exist.

As experts, when we examine your fire pump, we carefully disassemble, inspect, clean, repair, reassemble, and test run the system to make sure it is properly fixed. We fix the pump in record time and also on a budget, offering you the best quality possible.

For more information about Fire Pump service in NYC
call NY Pump & Motor at: (718) 768-8700


NY Pump & Motor repair - your trusted source for Fire Pump service in NYC

Pump Repair in NYC

Are you looking for Pump Repair in NYC? NY Pump & Motor Repair has been providing Pump Repair in NYC area since 1941. We pride ourselves with prompt & professional Pump Repair service with many years of experience and great customer care.

Why and When do you require pump repair?

Just like most things that you own, the pump in your building also requires periodic maintenance, especially if you want the pump to function smoothly for a long time. While the importance of conducting regular maintenance of the pumps in your car might seem obvious and straightforward, the pumps in your buildings tend to be hidden underneath floors and within the walls. More often than not, building owners simply forget that these pumps exist and do not remember to carry out regular maintenance of them. Properly maintaining your pumps and getting them checked on a regular basis will help you save thousands of dollars in pump repair or replacement, in case your pump breaks down altogether and stops working.

Signs that you’ve to get your pump repaired

The pump is one of the most important components of your house. Without a proper pump, there will be no water supply and without water, you will struggle to do anything at home. Therefore, it is imperative that you keep an eye at its functional value and ensure that the pump gets regular maintenance and doesn’t undergo irreparable damages.But how will you get to know if your pump actually needs a visit to a nearby pump repair center.

Here are some of the signs that you should look for:

The weep hole of the pump shows a significant amount of leakage

The temperature of the pump tends to go higher than normal

You find yourself having to start the pump manually more than you had to usually

You start noticing an odor inside the pump which was not present before

The pump doesn’t pump out as much water as it used to

You notice a sound coming from the pump when it is being used

Get rid of your pump repair woes at NY Pump

Looking for a reliable pump service in NYC? Look no farther than NY Pump & Motor. We have been providing top-notch pump service in NYC since 1941 and we are known for our prompt service and amazing customer care. 

With us, you’ll get professional pump repair services for commercial, residential, industrial, institutional, and municipal buildings. To know more about us, visit our official website. 

For more information about Pump Repair in NYC
call NY Pump & Motor at: (718) 768-8700

NY Pump & Motor - your trusted Pump Repair in NYC

Get a FREE Pump Repair estimate in NYC