Friday, March 20, 2020

Booster Pump Service in NYC

Are you looking for Water Booster Pump service in NYC? NY Pump & Motor has been providing Water Booster Pump service in NYC since 1941 with prompt service and great customer care.

Booster Pump Systems Service

In a home, water is evenly distributed using a pump system. This system takes water to the faucets, toilets, showers and other plumbing fixtures. But this is only possible if there is a sufficient amount of pressure and free flow.

The building characteristics determine the type of booster pump to be installed in any building. Different fixture outlets have minimum pressure and flow rate values; this is why most tall buildings need such a system.

Why you need booster systems service.

Low water pressure is the primary reason for installing a booster pump system. This means that the water supply pressure is not enough for the flow values of plumbing fixtures. When this happens, you have the option to either install:

  • 1. A booster pump system
  • 2. An elevated water tank or
  • 3. A hydro-pneumatic pump pressure booster.

  • How booster pump systems work.

    The system aims to fine-tune the flow rate in water fixtures. You can either install a Manual system or an automatic one. The manual method is activated, flipping a switch manually while the Automatic versions are self-activated on demand (i.e., when the water pressure falls under a specific limit).

    Before installing the system, you need to get professionals to examine your whole plumbing system. Our team at NY Pump and Motors will do a thorough check to make sure the Low water pressure problem doesn't have other causes like clogged pipes or undersized pipes.

    When installing this engine, you also need to deploy a speed control system because you are using an electric motor, and you need to save energy. A variable Frequency Drive will serve best for a gigantic building with a lot of outlets. The speed control system helps to maximize energy efficiency through speedy response to the building’s water supply conditions.

    Every booster pump system is expected to have a low-pressure cut off switch. The switch prevents the occurrence of a vacuum if the pressure on the suction hits 10psi or less. If this switch is not installed, cavitation can occur. Cavitation is when bubbles form and collapse in flowing water, which in turn caused shock waves that can damage the impeller. This shock wave can also cause mechanical vibrations, which can affect the pump's motor.

    If you have multiple buildings, you can use on booster system for all the premises when they are around each other. However, you should know that the NYC plumbing code prohibits people from supplying pressurized water to neighboring buildings they don't own.

    If you own a very tall building, then chances are you already have a booster pump system installed. And if you don't, then you need to install one or else your water system won't run properly. At the NY pump and motor, our technicians are experienced with handling any booster pump system service.

    For more information about Water Booster Pump service in NYC
    call NY Pump & Motor at: (718) 768-8700

    NY Pump & Motor repair - your trusted source for Water Booster Pump service in NYC

    Friday, March 13, 2020

    Pump Motor Rebuild in NYC

    Are you looking for Pump Motor Rebuild in NYC? NY Pump & Motor Repair has been providing Pump Motor Rebuild in NYC area since 1941. We pride ourselves with prompt & professional Pump Motor Rebuild services with many years of experience and great customer care.

    Pump Motor rebuild

    A pump motor rebuild is a less expensive technique for fixing pump problems. When the pump motor fails, the first question the owner asks is, "do I repair or replace the motor"? Both methods have their advantages and disadvantages.

    However, you should know that when a pump fails, the first thing to do is check if the warranty is still active. You can use this to your advantage by contacting the manufacturer. This is because pumps usually have a one-year guarantee. So if it gets damaged before that time, then the fault is most likely from the manufacturer.

    What you need to know about the Pump motor rebuild.

    Rebuilding a motor involves taking apart the machine repairing the broken parts and then putting it back together. Our technicians dismantle the device and take out bits that faulty, fix the defective part, and then place it back in the motor.

    Sometimes when rebuilding, you have to take a piece that has reached the end of its life and replace it with a new one in the motor. The motor is then placed back in the pump system, serving its purpose.

    Reasons you need a pump motor rebuild

    At NY Pump and Motors, we have expertly trained staff who can handle any form of repair and rebuilding. However, before requesting our services, you must know why you need your pump motor rebuilt.

  • 1. To save cost

  • One of the critical reasons for rebuilding instead of replacing the motor is to cut costs. Replacements can be an expensive venture if you are looking to save some money. When restoring, all you have to do is pay the technician a service fee. Sometimes you may have to pay a minimal fee for worn-out parts that need replacements

  • 2. To manage resources

  • When a motor fails, all parts are inspected. The technician then tries to fix the damaged part instead of outright condemning it to the junkyard. These parts can still be salvaged; therefore, you are conserving and managing resources better.

  • 3. To avoid multiple repairs

  • Often time, people resort to a simple fix when the motor is faulty. However, this method may not be effective because a repaired part doesn’t last long, and then you are back at the shop again. Rebuilding saves you the time spent going back and forth between repair shops.

    Proper Maintenance is the best preventive measure. Having a maintenance strategy will help you avoid unnecessary repairs and spending. Sometimes these repairs are unavoidable due to prolonged use of the systems.

    Hiring a company like Pump motors and repairs to help you with your pump maintenance is one of the wisest decisions to make. But if you still need a pump motor repair regardless, then don’t hesitate to contact us!
    For more information about Pump Motor Rebuild in NYC call NY Pump & Motor at: (718) 768-8700
    NY Pump & Motor - your trusted source for Pump Motor Rebuild in NYC

    Friday, March 6, 2020

    Pump Repair in NYC

    Are you looking for Pump Repair in NYC? NY Pump & Motor Repair has been providing Pump Repair in NYC area since 1941. We pride ourselves with prompt & professional Pump Repair service with many years of experience and great customer care.

    Pump Repair NYC

    Every house has a pump. Though the types of pump may vary, you will need pump repair from time to time. A pump is a device that helps to move liquids, gases, and sometimes solid from one point to another using suction or pressure.

    There are different types of pumps, namely: axial-flow pumps, centrifugal pumps, and Positive displacement pumps. Of the threes, the most commonly used are Positive displacement pumps and centrifugal pumps.

    These pumps are used as Sump Pumps, Water booster Pumps, Sewage pumps, Fire pumps, Air compressor Pumps, etc. However, no matter the pump type, there are specific symptoms the pumps exhibit that signifies that there may be a problem.

    How do you know you need pump repair?

    Here are some signs that your pump is defective and needs repairs. When you notice any of these signs, that would be the best time to call in the Calvary at NY Pump & Motor repairs.

    When the pump refuses to start

    This is the most obvious signal that something is wrong with your pump, and it needs repairs. It is like your pump suddenly goes into a coma and needs a doctor. A pump's refusal to start doesn't mean the pump is completely dead because the machine can still be salvaged

    If you try putting on the machine and you hear strange noises, don't try to force it to start as it may be causing more damage. Call a service company like the NY pump and Motor to help with the repairs. Sometimes the problem may be a little blockage in the system.

    A reduction in Flow

    One of the most common signs that repairs are needed is when liquid flow reduced. This is an indicator that there is a problem with the pressure system that affects the output. A partial clog in the system sometimes causes flow reduction.

    Other times, this may be an indicator that the impeller has been damaged or the classic tale of wear and tear of different parts. Over the years, as the pumps are used, it begins loosens and widens. This also affects pressure and flow.

    Leaking parts

    A leaking part typically indicates that a piece is broken or loose. Though the problem may not be as severe, leaks should be taken with the utmost concern. A leak problem may be solved by simply tightening a part.

    However, other times, the problem may be a broken part that needs to be changed. You cannot thoroughly assess the cause of the problem until you call in the experts. Our teams at NY Pump and motors will perform a complete diagnostic to pinpoint the source of the problem. After this, we can do repairs if requested.

    Pumps are an essential part of a housing system, and you can't be slacking when it comes to repairs. If you need pump repair NYC, contact us immediately as we are available 24/7. No matter the kind of pump, we have expertly trained and experienced technicians to help you in record time.

    For more information about Pump Repair in NYC call NY Pump & Motor at: (718) 768-8700
    NY Pump & Motor - your trusted Pump Repair in NYCGet a FREE Pump Repair estimate in NYC