The Dunham Bush pumps are properly built and widely used stem condensate pumps. The name 'Dunham-Bush' is the name of the pump producer, although recently they are being called 'Mepco pumps'. We specialize in installing, repairing, rebuilding and maintaining Dunham bush pumps installed in any building.
These pumps have different types such as:
Centrifugal pumps
The centrifugal end-suction pumps are considered capable of several applications i.e. they can be used for any general-purpose liquid or water. They come in three styles: In-line, closed couple, or base mounted.Boiler Feed Pumps
The Dunham bush boiler feed pumps exist in two forms; Either as a Simplex Pump (one) or as a Duplex Pump (two). The water level control unit of the boiler sends information and directs the feed pump and tank combinations.Condensate pump
If you are a company that needs to do a lot of steam heating condensate discharging, then you need to install a Dunham Bush Condensate Pump. They come in either Simple or duplex styles. They are installed with either standard steel tanks or cast-iron tanks in different size ranges.
How to maintain Dunham bush pumps
As a building manager or owner, you want to maintain the building's facilities to save you the cost of expensive repairs. You can subscribe to our maintenance services within a reasonable budget. What we do during routine maintenance is Inspecting the seal, lubricating the bearings and some other technical activities.
The intervals between inspection of pumps are determined by the kind of pumped fluid i.e. abrasive or corrosive and the environment the pump is placed. If Inspections are annual, we check the pumps' pressure, power, and capacity. If there is a hint of a problem the pump is taken apart and inspected properly.
During a three-month inspection, the following must be done:
- Oil change
- Examine shaft alignment and realign if necessary
- Inspect the foundation and tighten hold-down bolts if required.
During a routine inspection, the following must be done.
- Analysis of Pump Vibration
- Temperature check and evaluation
- Check the discharge pressure
- Examine the oil level and condition
- Check for leaks in the:
- Seal chamber and stuffing box (replace or adjust where necessary)
- Pump and piping
NY Pump and Motor repair also supply parts of Dunham bush pumps you may need when repairing damage such as Water seal kits, pump and motor assemblies, gaskets, pump impellers, replacements motors, and many others. These parts are also used for rebuilding pumps.
