Friday, February 5, 2021

Emergency Pump Services in NYC

Are you looking for emergency pump service in NYC? NY Pump & Motor has been providing emergency pump service in NYC since 1941.

Emergency Pump Services in NYC

Pumps can run into various problems at any time. One might need to replace, repair or install pumps on short notice. For such situations, we need emergency pump services in NYC. NY Pump and Motor Repair are experienced in providing emergency services for pump repairs, maintenance, rebuilding, or installation. 

Emergency services are to ensure that your defective pump is fixed immediately and is in working condition as soon as possible. The services differ for pumps of different types. Each has a variety of problems that need some special attention. Let's have a look at a few problems with pumps that need emergency services:

Fire Pump issues

        Abnormal vibrations: the fire pump might start showing abnormal vibrations and produce sounds. It is not normal and needs immediate attention.

        Leaking mechanical seal: this is a serious issue that can happen due to loose fitted screws, inadequate pressures, or some foreign object stuck inside.

        Motor overheating: if the quality is poor, or the mechanical seal is too tight the motor heats up fast due to enhanced friction. 

Heater Pump issues

        Frozen in winters: the outer coating gets covered in sheets of ice that jams the coils. This acts as a major barrier between the outside air and the refrigerant.

        Pump running constantly: the thermostat might not be set correctly or improper maintenance might cause issues in the heater that leads the pump to run constantly. 

        Cold air blowing out: this can be annoying when it is already cold outside. The problem might lie with the valve, refrigerant, or compressors. 

Water Booster Pump issues

        Leaking water: the lack of timely servicing or damage to the pump might cause water to leak. The pump will not work efficiently if it is leaking. The emergency services can help you repair the leaky pump in no time.

        Inconsistent water pressure: the pressure inside the pump might not be enough for the pump to work. It might happen when you are using the pump and calls for emergency service. 

        Warm water through cold taps: this is not how the cold taps in a water booster pump should work. It indicates that something is wrong with the water booster that needs immediate attention.

Apart from regular maintenance and repair services, pumps might run into various other issues as mentioned. Whenever you face any of the issues mentioned, don’t hesitate to call for emergency service and get the equipment fixed.

For more information on emergency pump service in NYC, call NY Pump & Motor Repair at (718) 768-8700!

NY Pump & Motor – Your trusted provider for emergency pump service in NYC

Wednesday, January 27, 2021

Fire Pump Service In NYC

 Are you looking for Fire Pump service in NYC? NY Pump & Motor has been providing Fire Pump service in NYC since 1941 with prompt service and great customer care.

A fire pump is a tool for an emergency. So, having it in perfect condition is necessary for every household. NY Pump and Motor repair are well known for their fire pump services in NYC. With complete services of installation, repair, and replacement, one can rely on them for getting the fire pump always ready for use. The workers are experienced and skilled, so you are in trusted hands. 

Types of services

        Fire Pump installation

The setting up of a water-based fire pump is the first step to safety against fire accidents. In emergencies, a fire pump is the first thing you have at hand for protection before the firemen arrive. Installation of a fire pump depends on various factors. The location and ease of access are two things to consider before setting up the pump. The room where you plan to install the pump should be free from any item that is not needed for the fire pump to operate. So, all these factors and other government policies are taken care of well by a professional fire pump service in NYC. It is best to contact them and get the installation done smoothly.

        Fire Pump Repair

Having a functional and defect-free fire pump is necessary. Therefore, timely repair works should be done on the installed pump to ensure it is ready for emergencies. If the pump has been installed for a long time, there are chances of some parts being damaged or aged. These need immediate repair services. 

        Fire Pump rebuild

One may want to rebuild the fire pump, heater pumps, water boosters, or other types of pumps. With professionals from NY Pump and Motor Repair, rebuilding services in NYC is just a call away. You can completely rely on the service for a good inspection and rebuilding of the pump to meet the requirements.

        Fire Pump Maintenance

Pumps of all types need proper maintenance to function properly. Since fire pumps are not something you use daily, they are susceptible to damages. Fire pump services are available for regular detailed inspections and other maintenance work.

        Fire Pump replacement

Fire pumps need to be replaced if they become too old or get damaged in some emergency. NY Pump and Motor Repair serves its customers with a hassle-free replacement of all sorts of pumps. Call in fire pump services in NYC to get the replacement done in time and be prepared for any uncalled-for situation. 

We provide 24 Hour pump service as well as emergency pump service for many satisfied clients. We also offer a variety of pump maintenance plans and programs to keep you covered. Get a Pump Service Estimate in NYC.

For more information about Fire Pump service in NYC
call NY Pump & Motor at: (718) 768-8700

 



Tuesday, December 29, 2020

Pump Repair Services

 Are you looking for Pump Repair in NYC? NY Pump & Motor Repair has been providing Pump Repair in NYC area since 1941. 

What Are The Different Aspects To Consider Pump Repair Services?

Both your house and office area is surrounded by a network of pumps. These pumps facilitate the flow of water and other materials to ensure that everything in your space works fine. Thus, one needs to remember that even if these pumps remain hidden beneath the walls, they require timely maintenance and repair in order to remain in good working condition. Ensuring this will save you some resources, cost of operations, and repairs.

Following are some aspects that explain why you should consider maintenance and pump repair services seriously. Here you go!

Pump repair services

Pump repair services and maintenance is something that needs to be done continually. Here are the various aspects of this requirement.

·         Predictive measure

Predictive maintenance is basically condition-based maintenance that is only carried out if you experience some default in the performance of your pumps or if the pump requires critical part replacement. This kind of maintenance is used only for components that are required to withstand extreme temperatures or the ones that vibrate excessively.

·         Preventive maintenance

It is part of proactive maintenance. Preventive maintenance is conducted to mainly detect any small issues that the system is experiencing in the present so that any big problems that can strike in the future can be avoided. The professional pump repair services have various advanced repair and installation techniques which they use to identify such troubles. Now, to some people, this process may sound like a time-consuming one, but carrying it out can save you thousands of dollars that you might end up spending in the future.

·         Periodic maintenance

Another aspect because of which you should consider maintenance and pump repair services is periodic maintenance. This sort of maintenance is carried out periodically and at pre-determined intervals. It is mainly performed for parts that get used very frequently. Such maintenance helps the owner in retaining the proper functioning of the system.

·         Breakdown maintenance

Breakdown maintenance is the most common type of maintenance that is carried out when the owner believes that some part of his pumping system has sustained irreparable damage due to which the system is experiencing troubles. Such maintenance is often a result of some major problem which makes it difficult to meet daily requirements. Breakdown maintenance usually requires a lot of labor and incurs huge expenses.

So, these are some aspects that one must consider for carrying out maintenance and pump repair services at his property.

For more information about Pump Repair in NYC
call NY Pump & Motor at: (718) 768-8700

NY Pump & Motor - your trusted Pump Repair in NYC

Tuesday, October 27, 2020

Emergency Pump Repair Service in NYC

 Are you looking for emergency pump service in NYC? NY Pump & Motor has been providing emergency pump service in NYC since 1941. NY Pump & Motor ensures your pump systems are efficient and working well! Our 24-hour pump service in NYC, ready for a pump service call.

When to call an emergency pump repair service

If you take a pump and ensure that it is well maintained, it should be able to last you for over a decade without any issues. However, this will require maintenance and regular checkups. However, this is easier said than done, and a lot can go wrong.

Eventually, they’re still man-made and can develop faults. When your pump begins to act up, it is usually time to call one of the emergency pump repair services in NYC. To know some of the signs to watch out for, look below:

A constant run

When a pump is beginning to reach the end of its life, it won’t quite be able to draw as much water from the well as it used to. This means that the pump will have to work double time to supply the same volume of fresh water into your home.

If you want to check if the pump is running constantly, check the pressure switch and see if it’s coming off and on regularly. You can also take note of your energy bills to see if your pump is working double time. 

A reduction in water pressure

If you want to notice that your plumbing fixtures aren’t flowing as they used to, there’s a good chance that your pump’s operating mechanism has taken a hit. The older a pump gets, the quicker the components lose efficiency. This means that the pump won’t be able to move as much water through the pipe. Eventually, you get a low-pressure supply.

Some of the problems that could lead to this include challenges with the pressure tank, scaling build-up pipes, and low well water levels.

Water outages

When it comes to signs of pump failure, hardly does any count as being as common as this one. If you notice that your faucet isn’t giving any water and you’re sure the well isn’t dry, you might be having issues with the pump.

Note, however, that the issue could be elsewhere. The circuit breaker could have been damaged, or you could have a bad pipe. If not, then the pump is where the problem is.

Faucets giving off air

You open your faucet and get air coming out instead of water. This could be because the pipes are releasing bubbles of air. In this case, your pump won’t be able to pull water from the well and into the house. 

If you notice this, then you usually only have a few more days before the entire system collapses. So, get in touch with the contractors who will be able to help you as soon as possible.

    For more information on emergency pump service in NYC, call NY Pump & Motor Repair at (718) 768-8700!

    NY Pump & Motor – Your trusted provider for emergency pump service in NYC

     Emergency Pump Service Financial District, NYC

     

     

     

    Tuesday, September 8, 2020

    Pump Repair In NYC

    Are you looking for  Pump Repair in NYC ?

    NY Pump & Motor Repair has been providing  Pump Repair in NYC  area since 1941.
    We pride ourselves with prompt & professional 
    Pump Repair  service with many years of experience and great customer care.

    NY Pump & Motor offers professional pump repair service in the tri-state area for many buildings and institutions. Our pump repair staff is ready to help you when you need us. At NY Pump & Motor Repair, we are experienced at providing buildings with a variety of pump repair and pump maintenance service for a variety of pumps such as heating pumps, water booster pumps, sewage ejector pumps and more.

    PUMP REPAIR BY TYPE

    24/7 Pump Repair Service

    We provide 24 Hour pump service as well as emergency pump service for many satisfied clients. We also offer a variety of pump maintenance plans and programs to keep you covered. Get a Pump Service Estimate in NYC.

    No Pump Repair problem is too big or small for NY Pump & Motor Repair. We understand that Pump Repair issues never arrive when you're ready for them so we offer 24 hour Pump Repair service in NYC for your convenience. When you need us we will be there fast to get your pump problem resolved. NY Pump & Motor Repair assures a minimal down time and a properly functioning pump by the time our Pump Repair service is completed.

    For more information about  Pump Repair in NYC
    call NY Pump & Motor at:  (718) 768-8700

    Thursday, July 23, 2020

    Grinder Pump service in NYC


    Grinder Pump service in NYC

    Are you looking for Grinder Pump service in NYC? Since 1941, NY Pump & Motor has been providing grinder pump service in NYC with prompt service and great customer care. We pride ourselves with prompt & professional Grinder Pump services while maintaining a high level of customer care. We provide 24 Hour grinder pump service as well as emergency pump service for many when your pump is not working properly.


    What Exactly is a grinder pump?
    A grinder pump breaks up and grinds up wastewater that is produced in your drainage system while sending the wastewater it into the public sewer system. A grinder pump is placed in a tank that is buried in an outdoor location on a property were this tank provides wastewater holding storage capacity. When water is used in the building, this wastewater flows into that tank. When the wastewater in the tank reaches a pre-set level, the grinder pump automatically turns on grinding the waste and pumps that out of the tank to the on-site sewer service line and into the public sewer system. A grinder pump will normally run for one or two minutes and automatically turn off when the tank is emptied. The pump is powered by electricity and is connected to a control panel by an electric meter.


    Why Some Businesses in NYC Need Grinder Pumps
    Since wastewater flows by gravity from a business' on-property sewer service line to a public sewer main where wastewater flows to specific treatment plants, the wastewater is cleaned, disinfected and safely returned to the environment. However, because of elevation, gravity may not work in all instances. In situations where a business sewer service line leaves the building at a lower elevation than the public sewer main, a grinder pump is necessary to grind and pump wastewater to the main.

    What can I do to protect my grinder pump in NYC?
    A properly maintained grinder pump should be able to handle wastewater from the kitchen, bathroom, laundry, with no problem. Harsh chemicals and substances can adversely impact a grinder pump and may cause safety hazards. We advice that you check the labels on all chemicals before using and disposing. 
    As a good rule of thumb, never pour the following items down drains or down toilets:


    • Grease (extract from cooking meat fats, oils, shortening, butter, margarine, food scraps, sauces and dairy products)
    • Explosive or flammable material
    • Kitty Litter
    • Aquarium gravel
    • Strong Chemicals or toxic, caustic or poisonous substances
    • Degreasing solvents
    • Diapers, feminine products, or cloth of any kind
    • Fuel or lubricating oil, paint thinner of antifreeze
    • Plastic objects
    • Seafood Shells.

    With NY Pump & Motor Repair, you are guaranteed minimal down time and a properly functioning pump by the time we are finished. Our onsite Grinder Pump Service Center ensures we can fabricate any materials needed to help repair or rebuild your broken pump, allowing us to provide quicker service.

    Whenever you need us to repair a Grinder Pump, we’ll be there to address the problem. When you choose NY Pump & Motor Repair, we assure you minimal down time and a properly functioning pump by the time our Grinder Pump service is completed.

    For more information about Grinder Pump service in NYC call NY Pump & Motor at: (718) 768-8700.

    NY Pump & Motor repair - your trusted source for Grinder Pump service in NYC

    Wednesday, July 8, 2020

    Pump Service in NYC


    Pump Service in NYC 

    Are you looking for pump service in NYC? NY Pump & Motor has been providing pump service in NYC since 1941 with prompt service and great customer care. NY Pump & Motor offers professional pump repair service for residential, commercial, industrial, municipal, and institutional buildings. Our expert pump service staff are very experienced in all phases or pump repairs, pump installations and pump service for all applications and usages. We provide 24/7 emergency pump services and our onsite Pump Service Center ensures we can fabricate any materials needed to help repair or rebuild your broken pump, allowing us to provide quicker service.

    Pump Service in NYC For All Industries and Applications
    Since 1941, our pump exerts at NY Pump has replaced and repaired many pumps for all industrial platforms and usages.  We have installed and repaired pumps for irrigation, water supply, air conditioning systems, refrigeration, chemical movement, sewage movement, flood control, marine services and other industries. NY Pump has performed pump service on a variety of pumps sizes and shapes through out these years. Our experience and knowledge of pumps has helped us succeed in servicing pumps for all boroughs in New York City, Long Island and the rest of the tri-state area. We have been servicing pumps for all types of buildings including real estate management companies, commercial bakeries, woodwork shops, hospitals and municipalities. We have provided pump repair service to the NYC Housing Department, Parks Department, Department of Education, Archdiocese of NY and countless other private property firms since 1941.

    Extensive Knowledge of Pump Manufacture and Designs
    In order to succeed in any industry, one must the everything about the application and use of a product. The experts at NY Pump have extensive knowledge on everything pump related. We have witnesses major improvements and developments that have helped may industries pump liquids and other materials cleaner, faster and more efficient.  Our pump technicians and service professionals are always up to date on the latest changes and improvements within the pump industry. We understand every application and what specific requirements are needed to operate any pump no matter the use. We have provided pump service in NYC for all the major pump manufactures including Bell and Gossett, Dayton, Armstrong, Dunham-Bush, Goulds, Grundfo, Tavo, Liberty, Berkeley, Sta-rite, Tsunami, Allied, Ketcham, Federal and other major pump manufactures on the market today. Having this knowledge will help us service your pump faster and more efficiently.

    For more information on pump service in NYC, call NY Pump & Motor Repair at (718) 768-8700.

    NY Pump & Motor – Your trusted provider for pump service in NYC.